The high-efficiency paint stripper has high use efficiency, can be used at room temperature, and the metal is less corrosive, does not add any equipment, and the construction is relatively simple. However, some solvents are poisonous, volatile, and flammable, and the cost is relatively high.
Precautions before using paint remover: Wear gloves, masks, etc. when using paint remover, because paint remover is a certain corrosive liquid. When paint remover accidentally touches the skin, it must be It is enough to rinse with plenty of water. If the paint remover splashes into the eyes, seek medical attention in time.
The process of using the paint remover:
1. Use immersion paint remover: soak all the workpieces to be removed in the paint remover for 0.5-5 minutes, the old paint film will swell strongly, bulge, and then all fall off. Use high-pressure water to knock off the paint remaining on the surface of the workpiece crumbs, then rinse with clean water.
2. Paint remover brushing type: For large workpieces, paint remover can be applied to the painted part with a brush or cotton yarn. For workpieces with a thick paint film, it can be repeatedly painted 2-3 times until the paint film falls off. Cleaning process Same as immersion.
3. When soaking, put the agent in an anti-corrosion container, add an appropriate amount of water to seal the agent to prevent volatilization. Before cleaning, we can put a certain amount of high-efficiency paint remover into the container, and then put the agent into the container. The material that needs to be stripped is soaked in it. After it can be cleaned, use a brush to brush the material. After cleaning the residual paint on the surface of the material, rinse it with water. Wait until the surface of the material is dry. For grinding, the surface of the material must be polished smooth, if it will affect the quality of the paint layer.
There are also many things that need to be paid attention to when using high-efficiency paint remover. High-efficiency paint remover can irritate human skin. Staff using paint remover must wear rubber gloves and protective glasses to avoid accidental splashing on the body during use. If the skin is accidentally splashed during use, it should be washed with plenty of water and seek medical attention in time. The paint remover is weakly alkaline, so it should be separated from acidic items and stored in a cool and dry place. ventilated place.
